Peoplegeist Demonstrator
Issue / Observations?
Instructions
- Select your native language for voice recording.
- Press & hold the to record a feedback.
- You can edit your feedback.
- See report after clicking
- OR -
select one of the examples below
Example employee comments
(click to select)
Manufacturing
Arm bewegt sich nicht und ein Kalibrierungsfehler wird angezeigt: Der Sensor ist durch einen verschlissenen Zahnriemen mit Spänen bedeckt. Tauschen Sie den Zahnriemen aus.
5 parts are good then 2 parts are not processed. Arm is not reaching the part. Timing belt expanded due to oil residue, replace the timing belt and it worked again.
Etiketten ohne Leim Magazin reingien
Packungen haben keine Etikette. Die Walze ist dreckig mit Leim. Die Walze reinigen
Packungen, die aus der Etikettiermaschine komnen, haben Kratzspuren Maschinen Karussell ist abgesenkt (74 auf 73) / Somit ist der Druck auf die Packung erhöht. Druckerposition neu einstellen
No date printed on the labels. Laser fitting was loose. Laser position adjusted and tightened screws
"good-till date" isn't correct. date not updated. Configure correct date.
membrane of freshwater intake is leaking Tighten screws
Prouct HTST is not steril. Product temperature too dropped below minimum. Mixture was poured in too quickly. Fill more carefully and slowly. Sterilized filler and restarted filler with new product.
hissing noise and dropping from the valve even through pressure is ok Valve was loose. Tighten valve.
Water HTST shows fault E23. Pressure isn't high enough. Acknowledge error and restart machine according to steps by Mario
Supply-Chain
3PL / warehouse
Again, we had no time for our breaks today. Everyone stayed to finish the day, good teamspirit.
3PL / warehouse
There were too many packages and too few people around. The unplanned overtime is hard for family life.
Station 5 Mitsubishi RV-4F - Arm dreht zu weit trotz neuem Zahnriemen Kalibrierungsprogramm ausführen oder nach Zahnriemenwechsel auf Nullpunkt neu positionieren.